|
Error |
Messages
|
|
600 |
An operation is
pending. |
|
601 |
The port handle is
invalid. |
|
602 |
The port is already
open. |
|
603 |
Caller's buffer is
too small. |
|
604 |
Wrong information
specified. |
|
605 |
Cannot set port
information. |
|
606 |
The port is not
connected. |
|
607 |
The event is
invalid. |
|
608 |
The device does not
exist |
|
609 |
The device type does
not exist. |
|
610 |
The buffer is
invalid. |
|
611 |
The route is not
available. |
|
612 |
The route is not
allocated. |
|
613 |
Invalid compression
specified. |
|
614 |
Out of buffers |
|
615 |
The port was not
found. |
|
616 |
An asynchronous
request is pending. |
|
617 |
The port or device
is already
disconnecting. |
|
618 |
The port is not
open. |
|
619 |
The port is
disconnected. |
|
620 |
There are no
endpoints. |
|
621 |
Cannot open the
phone book file. |
|
622 |
Cannot load the
phone book file. |
|
623 |
Cannot find the
phone book entry. |
|
624 |
Cannot write the
phone book file. |
|
625 |
Invalid
information found in
the phone book |
|
626 |
Cannot load a
string. |
|
627 |
Cannot find key. |
|
628 |
The port was
disconnected. |
|
629 |
The port was
disconnected by the
remote machine |
|
630 |
The port was
disconnected due to
hardware failure. |
|
631 |
The port was
disconnected by the
user. |
|
632 |
The structure size
is incorrect. |
|
633 |
The port is already
in use or is not
configured for
Remote
Access dialout. |
|
634 |
Cannot register your
computer on the
remote network. |
|
635 |
Unknown error. |
|
636 |
The wrong device is
attached to the
port. |
|
637 |
The string could not
be converted. |
|
638 |
The request has
timed out. |
|
639 |
No asynchronous net
available.
|
|
640 |
A NetBIOS error has
occurred.
|
|
641 |
The server cannot
allocate NetBIOS
resources needed to
support
the client. |
|
642 |
One of your NetBIOS
names is already
registered on the
remote
network. |
|
643. |
A network adapter at
the server failed |
|
644. |
You will not receive
network message
popups. |
|
645. |
Internal
authentication
error. |
|
646. |
The account is not
permitted to log on
at this time of day. |
|
647. |
The account is
disabled. |
|
648. |
The password has
expired. |
|
649. |
The account does not
have Remote Access
permission. |
|
650. |
The Remote Access
server is not
responding. |
|
651. |
Your modem (or other
connecting device)
has reported an
error. |
|
652. |
Unrecognized
response from the
device. |
|
653. |
A macro required by
the device was not
found in the device
.INF file section. |
|
654. |
A command or
response in the
device .INF file
section refers to an
undefined macro |
|
655. |
The <message> macro
was not found in the
device .INF file
section. |
|
656. |
The <defaultoff>
macro in the device
.INF file section
contains an
undefined macro |
|
657. |
The device .INF file
could not be opened. |
|
658. |
The device name in
the device .INF or
media .INI file is
too long. |
|
659. |
The media .INI file
refers to an unknown
device name. |
|
660. |
The device .INF file
contains no
responses for the
command. |
|
661. |
The device .INF file
is missing a
command. |
|
662. |
Attempted to set a
macro not listed in
device .INF file
section. |
|
663. |
The media .INI file
refers to an unknown
device type. |
|
664. |
Cannot allocate
memory. |
|
665. |
The port is not
configured for
Remote Access. |
|
666. |
Your modem (or other
connecting device)
is not functioning. |
|
667. |
Cannot read the
media .INI file. |
|
668. |
The connection
dropped. |
|
669. |
The usage parameter
in the media .INI
file is invalid. |
|
670. |
Cannot read the
section name from
the media .INI file. |
|
671. |
Cannot read the
device type from the
media .INI file. |
|
672. |
Cannot read the
device name from the
media .INI file. |
|
673. |
Cannot read the
usage from the media
.INI file. |
|
674. |
Cannot read the
maximum connection
BPS rate from the
media .INI file. |
|
675. |
Cannot read the
maximum carrier BPS
rate from the media
.INI file. |
|
676. |
The line is busy. |
|
677. |
A person answered
instead of a modem. |
|
678. |
There is no answer. |
|
679. |
Cannot detect
carrier. |
|
680. |
There is no dial
tone. |
|
681. |
General error
reported by device. |
|
682. |
ERROR WRITING
SECTIONNAME |
|
683. |
ERROR WRITING
DEVICETYPE |
|
684. |
ERROR WRITING
DEVICENAME |
|
685. |
ERROR WRITING
MAXCONNECTBPS |
|
686. |
ERROR WRITING
MAXCARRIERBPS |
|
687. |
ERROR WRITING USAGE |
|
688. |
ERROR WRITING
DEFAULTOFF |
|
689. |
ERROR READING
DEFAULTOFF |
|
690. |
ERROR EMPTY INI FILE |
|
691. |
Access denied
because username
and/or password is
invalid on the
domain. |
|
692. |
Hardware failure in
port or attached
device. |
|
693. |
ERROR NOT BINARY
MACRO |
|
694. |
ERROR DCB NOT FOUND |
|
695. |
ERROR STATE MACHINES
NOT STARTED |
|
696. |
ERROR STATE MACHINES
ALREADY STARTED |
|
697. |
ERROR PARTIAL
RESPONSE LOOPING |
|
698. |
A response keyname
in the device .INF
file is not in the
expected format. |
|
699. |
The device response
caused buffer
overflow. |
|
700. |
The expanded command
in the device .INF
file is too long. |
|
701. |
The device moved to
a BPS rate not
supported by the COM
driver. |
|
702. |
Device response
received when none
expected. |
|
703. |
ERROR INTERACTIVE
MODE |
|
704. |
ERROR BAD CALLBACK
NUMBER |
|
705. |
ERROR INVALID AUTH
STATE |
|
706. |
ERROR WRITING
INITBPS |
|
707. |
X.25 diagnostic
indication. |
|
708. |
The account has
expired. |
|
709. |
Error changing
password on domain. |
|
710. |
Serial overrun
errors were detected
while communicating
with your modem. |
|
711. |
RasMan
initialization
failure. Check the
event log. |
|
712. |
Biplex port is
initializing. Wait a
few seconds and
redial. |
|
713. |
No active ISDN lines
are available. |
|
714. |
Not enough ISDN
channels are
available to make
the call. |
|
715. |
Too many errors
occurred because of
poor phone line
quality. |
|
716. |
The Remote Access IP
configuration is
unusable. |
|
717. |
No IP addresses are
available in the
static pool of
Remote Access IP
addresses. |
|
718. |
PPP timeout. |
|
719. |
PPP terminated by
remote machine. |
|
720. |
No PPP control
protocols
configured. |
|
721. |
Remote PPP peer is
not responding. |
|
722. |
The PPP packet is
invalid. |
|
723. |
The phone number,
including prefix and
suffix, is too long. |
|
724. |
The IPX protocol
cannot dial-out on
the port because the
computer is an IPX
router. |
|
725. |
The IPX protocol
cannot dial-in on
the port because the
IPX router is not
installed. |
|
726. |
The IPX protocol
cannot be used for
dial-out on more
than one port at a
time. |
|
727. |
Cannot access
TCPCFG.DLL |
|
728. |
Cannot find an IP
adapter bound to
Remote Access. |
|
729. |
SLIP cannot be used
unless the IP
protocol is
installed. |
|
730. |
Computer
registration is not
complete. |
|
731. |
The protocol is not
configured. |
|
732. |
The PPP negotiation
is not converging. |
|
733. |
The PPP control
protocol for this
network protocol is
not available on the
server. |
|
734. |
The PPP link control
protocol terminated. |
|
735. |
The requested
address was rejected
by the server. |
|
736. |
The remote computer
terminated the
control protocol. |
|
737. |
Loopback detected. |
|
738. |
The server did not
assign an address. |
|
739. |
The remote server
cannot use the
Windows NT encrypted
password. |
|
740. |
The TAPI devices
configured for
Remote Access failed
to initialize or
were not installed
correctly. |
|
741. |
The local computer
does not support
encryption. |
|
742. |
The remote server
does not support
encryption. |
|
743. |
The remote server
requires encryption. |
|
744. |
Cannot use the IPX
net number assigned
by the remote
server.Check the
event log. |
|
752. |
A syntax error was
encountered while
processing a script. |
